[Discuss] Kernel interpretation of pressing the reset button?

Cy Schubert Cy.Schubert at cschubert.com
Tue Jun 12 20:22:20 PDT 2018


In message <nycvar.QRO.7.76.1806121859460.19119 at zreyva.zlyna.ubzr>, 
"Alan W. Ir
win" writes:
> On 2018-06-12 13:12-0700 Drew wrote:
>
> > Alan,
> >
> > That is in fact the reset button on that case. The slightly tilted C
> > is a reset symbol and should depress at least somewhat. If you've had
> > the front panel off, just double check that it wasn't pressed back on
> > incorrectly, causing some jamming. Corsair, on my (different model)
> > case uses a small black button that's impossible to find in the dark
> > (sits under my desk) and is prone to jam at times when I've put the
> > case back on.
>
> Hi Drew:
>
> Your helpful comment lead me to take a very close look at that
> left-hand icon and indeed there is a minute arrow on one end of the
> "C" which is reasonably consistent (although not identical) with a few
> of the forms of the reset icons you can find with a google image
> search.  So I think you must be right and my speculation that icon
> meant something other than reset was wrong.
>
> So that leads back to the original question of why on some occasions
> when the kernel was locked up there was no response to pressing the
> reset button on this new computer.  Cy previously suggested a hardware
> fault was the cause of those intermittent failures of the reset
> button, and of the many possibilities there, your suggestion that the
> reset button might be jammed is consistent with my experience which it
> is it almost always something really simple that is wrong with
> computers.  :-)

A jammed reset switch can fry the motherboard or CPU.

>
> Note, I have not taken off the front panel, but if the part is easy to
> jam, then it is certainly possible such jamming accidentally occurred
> when the box was assembled (by Mother Computers).  Anyhow, to check
> for hardware reliability of the reset button, I am going to try some
> resets in an environment (grub boot menu) where the kernel (locked up
> or otherwise) is not involved (and which also has the side benefit
> that dirty shutdowns will not be generated by the resets).
>
> Alan
> __________________________
> Alan W. Irwin
>
> Programming affiliations with the FreeEOS equation-of-state
> implementation for stellar interiors (freeeos.sf.net); the Time
> Ephemerides project (timeephem.sf.net); PLplot scientific plotting
> software package (plplot.sf.net); the libLASi project
> (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net);
> and the Linux Brochure Project (lbproject.sf.net).
> __________________________
>
> Linux-powered Science
> __________________________
>
> _______________________________________________
> Discuss mailing list
> Discuss at vlug.org
> http://vlug.org/mailman/listinfo/discuss_vlug.org
>

-- 
Cheers,
Cy Schubert <Cy.Schubert at cschubert.com>
FreeBSD UNIX:  <cy at FreeBSD.org>   Web:  http://www.FreeBSD.org

	The need of the many outweighs the greed of the few.





More information about the Discuss mailing list