[Discuss] Kernel interpretation of pressing the reset button?
Alan W. Irwin
Alan.W.Irwin1234 at gmail.com
Thu Jun 14 00:22:08 PDT 2018
On 2018-06-13 14:17-0700 Alan W. Irwin wrote:
> So (likely this evening) I plan to discover experimentally (by tests
> from the grub menu environment where the kernel is not active at all)
> if that unreliability is an issue with the reset hardware or simply a
> strange artifact of the kernel lock up.
Or another rather mundane issue which I just discovered that is likely the
cause of my intermittent failure to get any action out of the reset
button. What I just observed is the reset button on this Corsair case
has a much stronger spring than the power off button so if you hit
reset strongly and right on target there is a smooth depression of the
switch and you always (at least 10 straight) get a reset. But if you
are slightly off target the button does not depress at all and you get
no reset.
So I am relying on memory at this point, but during the emotional time
when I was trying to gain control of a locked up system and the reset
button did not seem to work, I am pretty sure it did not depress at
all, i.e., I was not hitting it right on target.
My thanks to Drew for making the key comment (yes, that left hand side
of the piece of plastic really did correspond with a reset button on
Corsair cases) that put me on the right track to unlock this puzzle.
Also, for this Corsair case I tried a short depress of the power
button to see if that gave me a reset, and the answer is no, it gave
me a power off. Which in retrospect makes sense; there is no need for
an integrated power and reset button if you already have a separate
reset button. So my previous impression that the power button was
just like my previous computers (i.e., you needed to depress the power
button for a few seconds to get the power off) was incorrect.
Finally, could someone tackle my question asked earlier in this thread
concerning the significance of the inodes that are often removed when
booting after a dirty shutdown? For example, if a file (e.g., a log
file) is being updated does the removed inode effectively just
delete the updates not written out to disk at the time of the dirty
shutdown or the whole file?
Alan
__________________________
Alan W. Irwin
Programming affiliations with the FreeEOS equation-of-state
implementation for stellar interiors (freeeos.sf.net); the Time
Ephemerides project (timeephem.sf.net); PLplot scientific plotting
software package (plplot.sf.net); the libLASi project
(unifont.org/lasi); the Loads of Linux Links project (loll.sf.net);
and the Linux Brochure Project (lbproject.sf.net).
__________________________
Linux-powered Science
__________________________
More information about the Discuss
mailing list